This sort of issue can happen if the extender doesn’t have the most recent firmware. Procedure: Make sure the extender is associated with the power connector gave and into a live electrical plug. Ensure the extender is inside the Wi-Fi scope of the remote switch and customer device is associated with the extenders organize.

WPS represents Wi-Fi Protected Setup. It is a remote system security standard that attempts to make associations between a switch and remote gadgets quicker and simpler. WPS works just for remote systems that utilization a secret key that is scrambled with the WPA Personal or WPA2 Personal security conventions.

This sort of issue can happen if the extender doesn’t have the most recent firmware. Procedure: Make sure the extender is associated with the power connector gave and into a live electrical plug. Ensure the extender is inside the Wi-Fi scope of the remote switch and customer gadget is associated with the extenders arrange.

Play out a system power cycle by rebooting your fundamental switch and extender. Reconnect to the default WiFi system of your NETGEAR extender. Open the internet browser and re-run the NETGEAR extender arrangement wizard. On the off chance that the issue continues, reset the extender back to the default processing plant settings

Press the reset button on the backboard until the two Link Rate LED and Device to Extender flickers. This takes about 5-10 seconds. …
Release the button.
Wait for the extender to reboot.
Log in with the default password. The default username is (“admin”) and password (“password”).
Another technique is the product strategy.

Associate your PC to the extender with an Ethernet link. You can utilize any of the five Ethernet LAN ports of the extender. Alert: Do not utilize an Ethernet link to associate the extender to a Wi-Fi switch. In the event that you do as such, the extender doesn’t work since it is intended to utilize just a Wi-Fi association with a Wi-Fi switch.